Conceptronic C150APRA2 Manual de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
CONCEPTRONIC C150APRA2 ENGLISH
33
By default, Enable DHCP Server is selected for the LAN interface of the device. DHCP service
provides IP settings to workstations configured to automatically obtain IP settings that are
connected to the device through the Ethernet port. When the device is used for DHCP, it becomes
the default gateway for DHCP client connected to it. If you change the IP address of the device, you
must also change the range of IP addresses in the pool used for DHCP on the LAN. The IP address
pool can contain up to 253 IP addresses.
Click Apply to save the settings.
In the LOCAL NETWORK page, you can assign LAN IP addresses for specific computers according to
their MAC addresses.
Click Add to add static DHCP reservation. The page as shown in the following figure appears:
The following table describes the parameters in this page.
Description
Select the check box to reserve the IP address for the designated
PC with the configured MAC address.
Enter the computer name. It helps you to recognize the PC with
the MAC address. For example, Father‘s Laptop.
Enter the IP address of the computer.
Enter the MAC address of the computer.
Click Apply to save the settings.
After the DHCP reservation information is saved, the DHCP reservations list displays the information.
If the DHCP reservations list is not empty, you can select one or more items and click Edit or
Delete.
The NUMBER OF DYNAMIC DHCP CLIENTS page displays the DHCP clients (PCs or Laptops) currently
connected to the device and the detailed information of the connected computers.
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 110 111

Comentarios a estos manuales

Sin comentarios