Conceptronic C150APRA2 Manual de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 111
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
CONCEPTRONIC C150APRA2 ENGLISH
103
6. Frequently Asked Questions
Below you will find some frequently asked questions for the device.
Answer
Check the connection between the power adapter and the
power socket.
Check whether the power switch is turned on.
Check the following:
The connection between the device and the PC, the hub, or
the switch.
The running status of the computer, hub, or switch.
The cables that connects the device and other devices:
If the device connects to a computer, use the cross over
cable.
If the device connects to a hub or a switch, use the
straight-through cable.
Check the connection between the DSL interface of the device
and the socket.
Ensure that the following information is entered correctly:
VPI and VCI
User name and password
Choose Start > Run from the desktop. Enter Ping 192.168.0.1
(the default IP address of the device) in the DOS window.
If the web configuration page still cannot be accessed, check the
following configuration:
The type of the network cable
The connection between the device and the computer
The TCP/IP properties of the network card of the computer
Keep the device powered on and press the Reset button for 5
seconds. Then, the device automatically reboots and is restored
to the factory default configuration.
The default configuration of the device is as follows:
IP address: 192.168.0.1
Subnet mask: 255.255.255.0.
Password of user admin: admin
Enjoy the use of your
Conceptronic C150APRA2!
Vista de pagina 102

Comentarios a estos manuales

Sin comentarios